Shop
Product Name : RGR Capacity : 856 kw / 100 rpm Max bore : 260 mm
Product Name : B-FLEX: LBC Capacity : 249 kw / 100 rpm Max bore : 190 mm
Special Bushes provide stiffness characteristics, absorbs effective shocks, torsional vibrations and accommodates misalignments.Product Name : B-FLEX: RB Capacity : 13614 kw / 100 rpm Max bore : 600 mm
B-Flex couplings consist of a set of resilient BARREL Shaped bushes with pins & nuts and two flanged hubs of graded cast iron. The special BARREL shaped bushes permit the MISALIGNMENT IN ALL DIRECTIONS and give extra torsional flexibility as compared to plain bushes. These couplings are suitable for general engineering application requiring reliable power transmission even under conditions of shaft misalignments which are often unavoidable.Product Name : CONE-FLEX RC/RCT Capacity : 1047 kw / 100 rpm Max bore : 286 mm
Cone-Flex couplings consists of sets of resilient “ Cone-Flex” rings with pins & nuts and two flanged hubs of graded cast iron. These “ Cone-Flex” rings are specially shaped to permit the rubber to deflect in all directions and give over four times torsional flexibility as compared to a plain bush.Product Name : H / HR Capacity : 6807 kw / 100 rpm Max bore : 600 mm
- Individual free-floating load cushions held in place by outside steel collar.
- Completely machined castings.
- Easy to assemble & disassemble.
- Cushions easily inspected at all times.
Product Name : L Capacity : 113 kw / 100 rpm Max bore : 115 mm
With its unique wrap around Nitrile rubber connecting element, the Snap Wrap coupling eliminates the need for dismantling the connected equipment while inspecting or replacing the element – a major benefit when down-time on machinery can run into huge amount Combined with a range of prebored hubs, a modular hub design and a spacer option, the Snap Wrap coupling is unsurpassed for quality, flexibility, speed for installation and maintenance. Download CatalogueProduct Name : LFG / LHG Capacity : 17454 kw / 100 rpm Max bore : 710 mm
- Less Backlash.
- Compact Assembly
- Larger Bore capacities.
- High Power To Weight Ratio.
- Accommodates Angular, Parallel & Axial Misalignment.
- Generally used upto 120°C. Can be used for higher temperatures by using proper grade of grease or oil.
Product Name : RFC Capacity : 33 kw / 100 rpm Max bore : 100 mm
Easy Installation Alignment is quickly achieved by simply placing a straight edge across the outside diameter of the hubs. No special tools are needed, only a hexagon wrench for the locking of the taper bush. Extra protection Against Failure The Inter-linking hubs act as a additional safeguard, though the flexible element fails, the drive will be Maintained by the interaction of the jaws which are an integral part of the coupling hubs. The hubs are made of C.I. Jaws are unmachined.Product Name : RGD / RGS Capacity : 5300 kw / 100 rpm Max bore : 360 mm
- High Torque Ratings
- Large Bore Capacity
- Interchangeability
- Better Fastener Design
- High Misalignment Capacity
- Improved Lubrication System
Product Name : RJB Capacity :5.49 kw / 100 rpm Max Bore : 62 mm
- Backlash Free
- Torsionally Stiff
- Vibrating – Reducing
- Axial Plug-in
- Maintenance Free
- Electrically Insulating
- Fail Safe Insulating
- Coupling For Machine Tools, Automation, Power Transmission, Medical Technology, Packing Technology and Servo Motor Application
- Ambient temp. from -40°C 90°C possible (dependent on spider)
- Product Name : RLM / RLMK Capacity : 140 kw / 100 rpm Max bore : 165 mm
Disc-O-Flex couplings are fully metallic couplings, consisting of two hubs, one centre spacer member, two sets of stainless steel element blades bolted together with high tensile bolts. Replacement of element blades is easy, simple and is possible without disturbing drive or driven equipment. Type – RLM- Normal duty coupling
- Suitable for general industrial applications
1
2
